Jb Weld
PlasticWeld™
PlasticWeld™

Strength

3900 PSI

Set Time

5 Minutes

Cure Time

1 Hour

Cure Color

Off White

PlasticWeld™ Syringe - 25 ml

SKU: 50132

$ 8.99 In stock

PlasticWeld™ is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld™ will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld™ sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld™ combines to a tensile strength of 3900 PSI and cures to an off-white color.

Great For

  • Most Hard Plastics
  • ABS
  • Fiberglass
  • PVC
  • Glass
  • Vinyl
  • Most Composites

Use On

  • Automotive
  • Ceramic
  • Fiberglass
  • Plastic/Composite/PVC
  • And More

1

Prepare

2

Mix

3

Apply

4

Dry

1

Prepare

Clean repair area of dirt, grease, oil, paint, rust, etc.
2

Mix

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3

Apply

Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4

Dry

Set in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees F, then set time is longer.

A Few
Similar Products

Strength

Set Time

Cure Time

Cure Color

PlasticBonder™ Syringe - 25 ml

Strength

3770 PSI

Set Time

15 Minutes

Cure Time

30 Minutes

Cure Color

Tan

PlasticBonder™ Syringe - 25 ml

Strength

3770 PSI

Set Time

15 Minutes

Cure Time

30 Minutes

Cure Color

Black