Jb Weld
J-B Weld™
J-B Weld™
a person sitting on a table
a pizza sitting on top of a wooden table
a vase sitting on top of a wooden table
How To Use Clear Top

Strength

Resists Scratches & Impact

Set Time

5 hours

Cure Time

24 hours

Cure Color

Clear

J-B Weld™ ClearTop Pour-On Epoxy 128 fl oz

SKU: 41128

$ 89.99 In stock


J-B Weld ClearTop is a two-part pour-on epoxy that is specially formulated for coating projects on tables, bartops, and other surfaces. When properly mixed and applied, ClearTop cures crystal clear with a durable finish that resists scratches, impact, and hot objects up to 150°F.

Great For

  • Tabletops
  • Bartops
  • Countertops

Use On

  • Wood & More

It's Easy To Get
The Fix You Need

1

Prepare

2

Measure & Mix

3

Pour

4

Cure

1

Prepare

Make sure temps are above 75º with humidity below 60%. Clean surface of dust and debris, ensuring work area is dry and dust-free. Cover area around project with sheeting to catch any drips. Bond any objects to be embedded to the surface.
2

Measure & Mix

Pour equal parts of Part A (Resin) and Part B (Hardener) into separate measuring cups with a 1:1 ratio.

Pour Hardener (Part B) into mixing cup first, then add Resin (Part A), scraping sides and bottoms to ensure equal proportions. Mix thoroughly with stir stick for 3-5 minutes, scraping the sides and bottom of container for proper mixing.

Pour mixed product into second mixing cup, scraping all product from sides and bottom. Thoroughly mix for an additional 1-2 minutes. Let mixture sit for 3 minutes.
3

Pour

Apply initial seal coat - a thin layer that will reduce air bubbles - by pouring mixture across surface in a zig-zag motion, and then spread with a squeegee. Remove any air bubbles with heat. Let dry for 3-5 hours.

Apply flood coat - pour the mixture across the entire surface (mixture will self-level). Use rubber squeegee or brush to guide.

Remove air bubbles with a heat gun or hair dryer, sweeping across entire surface at a 45º angle to pop bubbles.
4

Cure

Keep product in clean, dust-free environment until fully cured. Product will dry in 5-6 hours, and will fully cure in 24 hours.

A Few
Similar Products

Strength

Set Time

Cure Time

Cure Color

J-B Weld™ UltraRez UV-Resistant Coating & Casting Epoxy 128 fl oz

Strength

Resists Scratches & Impact

Set Time

5 hours

Cure Time

24 hours

Cure Color

Clear

J-B Weld™ UltraRez UV-Resistant Coating & Casting Epoxy 32 fl oz

Strength

Resists Scratches & Impact

Set Time

5 hours

Cure Time

24 hours

Cure Color

Clear

J-B Weld™ ClearTop Pour-On Epoxy 32 fl oz

Strength

Resists Scratches & Impact

Set Time

5 hours

Cure Time

24 hours

Cure Color

Clear