Jb Weld
PlasticBonder™
PlasticBonder™
letter
a close-up of a cigarette
How To Use Syringes

Strength

3770 PSI

Set Time

15 Minutes

Cure Time

30 Minutes

Cure Color

Tan

PlasticBonder™ Syringe - 25 ml

SKU: 50133

$ 8.99 In stock


PlasticBonder™ is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder™ has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder™ sets to a tan color and cures to a hard, permanent bond.

Great For

  • Filling Dents
  • Bumpers
  • Automotive Trim
  • Composite Panels
  • Interior & Exterior Plastic Parts
  • Fiberglass

Use On

  • Automotive
  • Brick
  • Ceramic
  • Concrete
  • Fiberglass
  • Plastic/Composite/PVC
  • Wood
  • And More

1

Prepare

2

Mix

3

Apply

4

Dry

1

Prepare

Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2

Mix

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3

Apply

Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4

Dry

Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40ºF, then set time is longer.

A Few
Similar Products

Strength

Set Time

Cure Time

Cure Color

PlasticBonder™ Syringe - 25 ml

Strength

3770 PSI

Set Time

15 Minutes

Cure Time

30 Minutes

Cure Color

Black