Jb Weld
ExtremeHeat™
ExtremeHeat™
a black and white document
text
How To Use Exhaust Repair Solutions

Set Time

1 Hour

Cure Time

24 Hours

Cure Color

Dark Gray

ExtremeHeat™ Paste - 3 oz

SKU: 37901

$ 11.99 In stock


ExtremeHeat™ is formulated to allow for repairs to iron, steel and metal in high temperature environments (1000°F / 537°C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).

Great For

  • Exhaust Manifolds
  • Tail Pipes
  • Mufflers
  • Engine Blocks
  • Duct Work
  • Heat Exchange Units
  • Fire Box / Fire Place
  • Outdoor Grills

Use On

  • Automotive
  • Metal
  • And More

1

Prepare

2

Mix

3

Apply

4

Dry

1

Prepare

Remove dirt, debris or loose contaminants from surface. Use sand paper to roughen. For some repairs, open small cracks further with a drill or screwdriver to create a 1/8" gap.
2

Mix

Open J-B Weld® Extreme Heat™. Thoroughly mix product.
3

Apply

Use product generously, working onto surface or into hole, crack, pit or seam. Repeat as needed. Allow 2-4 hours set up, depending on temperature and current environment.
4

Dry

Test cure by pressing fingernail or thumbnail into repair material. If unable to penetrate, then repair is complete. If area appears slightly soft, use a non-flame heat source, such as a hair dryer, to speed cure time, or allow 24 hours before allowing high heat exposure. Repeat test until fully cured.

A Few
Similar Products

Strength

Set Time

Cure Time

Cure Color

HighHeat™ Epoxy Putty - 2 oz

Strength

4000 PSI

Set Time

1 Hour

Cure Time

8 Hours

Cure Color

Dark Gray

MufflerSeal Muffler Cement

Strength

NA

Set Time

2- 4 hours

Cure Time

24 hours

Cure Color

Dark Gray