World's Strongest Bond

Products

HighHeat

HighHeat

Temperature Resistant Epoxy Putty

  • Strength 800 PSI at Room Temp. 600 PSI at 400ºF
  • Set Time 1 Hour
  • Functional Cure 8 Hours
  • Dries Machine Grey

Great For:

  • Exhaust Manifolds
  • Tail Pipes
  • Mufflers
  • Engine Blocks
  • Duct Work
  • Machinery
  • High Temperature Projects

 
 

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400ºF and intermittent heat exposure to 550ºF

INSTRUCTIONS

 Cut: Remove required amount of putty.

 Mix: Thoroughly knead putty with fingers to a uniform color.

 Apply: Press putty firmly to the surface to be repaired.

 

* For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.