Quick Setting Epoxy
- Strength 4400 PSI
- Set Time 5 Minutes
- Cure Time 1 Hour
- Dries Clear
- Most Plastics
ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, ClearWeld sets to a hard, permanent bond.
Prepare: Clean surface area of dirt, grease, oil, paint or loose debris.*
Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40ºF, then set time is longer.
* For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
- Download MSDS